CMGT 555 ENTIRE COURSE


Ask a Question

CMGT 555 ENTIRE COURSE

Sale price $50.00 Regular price $100.00

CMGT 555 ENTIRE COURSE
 
 
 
 
 
 
CMGT 555 Week 1 Supporting Activites
 
CMGT 555 Week 1 Supporting Activity Risk in SDLC
 
Describe at least one risk inherent in each phase of the SDLC.
 
CMGT 555 Week 1 Supporting Activity   Development Methodologies
 
Think about a past or present organization that you know. Describe the approaches for that organization that would work well (or would not work well), based on your understanding of these approaches:
Prototyping
CASE tools
Joint application design
Rapid application design
Participatory design
Agile methodologies
Object-oriented analysis and design
 
 
 
 
 
CMGT 555 Week 2 Supporting Activites
 
CMGT 555 Week 2 Supporting Activity  Discussion Topic #1
 
Pick any two questions. Please include the question # and question in your response. Limit your response to one page per question.
 
1.  In Chapter 6 of ‘Essential Systems Analysis and Design’, the discussion is about the data flow diagramming mechanics, and also being able to see how using data flow diagramming in the analysis process. 


Q:  What should be shown on an:
(a) architecture diagram and
(b) context diagram?
 
CMGT 555 Week 2 Supporting Activity  Discussion Topic #2
 
2.  Why is simplicity desired in an object model?
 
CMGT 555 Week 2 Learning Team Assignment
 
CMGT 555 Week 2 Learning Team Assignment
 
 
CMGT 555 Week 3 Individual Assignment
 
DIRECTIONS:
For the Week Three paper, choose any TWO of the FIVE topics below and follow the directions for that topic. 
Diagrams (where applicable) are highly recommended.
(Only TWO  TOPICS are required for the written assignment. 
Each topic requires two external references)
 
 Remember that systems are composed of hardware, software, and people.


 
CONTENT:
 
Topic 1 - Object Oriented Analysis (write on each of the three sub-topics and give an example of each; including the appropriate diagrams.)
Classes
Inheritance
Relationships
 
Topic 2 - Diagrams (explain the contents and use of each of the three sub-topics and give an example of each.)
Context Diagram
Functional Diagram
Network Diagram (both logical and physical)
 
Topic 3 - ‘How Requirements Drive the Design’ – (explain how the transition from analysis to design takes place.)
 
Topic 4 - Compare ‘Logical Design’ vs. ‘Physical Design’ (explain when they are used, what design information they contain, and any similarities or differences.)
 
Topic 5 - Design Strategies  - (Compare and Contrast the following three Design Strategies describing the strategy and how it applies to system design.  Address the advantages versus disadvantages of each strategy.)  
Outsourcing
Off-the-shelf
In-house development
 
CMGT 555 Week 3 Supporting Activites
 
CMGT 555 Week 3 Supporting Activity Discussion Topic #1
 
.  What is the difference between a procedure-driven and an event-driven design strategy for controlling a system?  Give a brief example of each.
 
CMGT 555 Week 3 Supporting Activity Discussion Topic #2
 
What is the difference between physical design and logical design?
 
CMGT 555 Week 3 Learning Team Assignment
 
ASSIGNMENT: Using the materials presented in weeks two and three, each Learning Team will discuss how the team will use the requirements listed in the Week Two LT Assignment (Section 2.3) to transition to the ATM System Design. 
What to do:
The team will submit a 2 – 3 page summary (not counting the title page or reference section) of the team’s findings plus tables.
Use the same format and style (title page, body, and reference section). 
See my post on the Week 3 LT Approach.
 
 
 
 
CMGT 555 Week 4 Supporting Activites
 
CMGT 555 Week 4 Supporting Activity Discussion Topic #1
 
.  What are the characteristics of effective pseudo-code?
 
CMGT 555 Week 4 Supporting Activity Discussion Topic #2
 
2.  What should be included in the documentation of the functional model?
 
 
CMGT 555 Week 4  Learning Team Assignment
 
CMGT 555 Week 4  Learning Team Assignment
 
 
 
 
CMGT 555 Week 5 Individual Assignment
 
DIRECTIONS:
For the Week Five paper, choose TWO of the three TOPICS below and follow the directions for that topic.
 
I want to make sure you understand that all three of these TOPICS have to do with PROCESS and NOT the actual development.  A process is a method of doing the development.  An example is everybody doing the testing process in the same manner – not the test itself.  When this happens, then automated tools can be developed to help make the process more efficient. See my post in the Course Materials forum “What is a Process?”
System/Software Process and Quality Characteristics
 
Topic 1   ISO 9126 System Quality Characteristics
Quality characteristics apply equally to hardware and software. 
Pick any two ISO 9126 System Quality Characteristics (do not forget the Sub Characteristics) from the list below and describe how they apply to the system development process:
           Functionality
           Reliability
           Usability
           Efficiency
           Maintainability
           Portability
 
Topic 2   Software Engineering Institute’s (SEI) Capability Maturity Models (CMM)
 
Describe how the SEI Capability Maturity Models  (Software (CMM-S) or Integration (CMM-I)) apply to the System Development Process.  Do not restate the definition of each level within the model.
 
Also indicate whether or not your company participates in the Capability Maturity Model and if so, what level they have achieved.
 
 
Topic 3   What role do ‘Standards’ play in the System Development process?
 
You may address system, software, or hardware standards.
Give one or two examples of ‘standards’ that apply in your line of work.  



 
 
 
 
CMGT 555 Week 5 Learning Team Assignment   
 
CMGT 555 Week 5 Learning Team Assignment   
 
 
CMGT 555 Week 5 Supporting Activites
 
CMGT 555 Week 5 Supporting Activity  Discussion Topic #1
 
1.  Define Systems Support.  Give an example of System Support from your work knowledge.
 
CMGT 555 Week 5 Supporting Activity  Discussion Topic #2
 
2.What is the difference between (pick any two):
- corrective maintenance
- adaptive maintenance
- perfective maintenance
- preventative maintenance?
Include an example for each of the two types of maintenance in your answer.
 
 
CMGT 555 Week 6 Learning Team Assignment   
 
Learning Team Week Six Assignment Description
How To Use This Outline
 
Title Page
- Complete the appropriate information on this title page and delete the italicized comments.
- Use the included APA Style short title (LT X Week 6 Paper) (X is the LT letter) and page number.
- Delete this blue text.
 
Remaining Pages
- The Learning Team will complete the appropriate information.
- Use may use this template as is.  You do not have to retype it.
- Leave the formatting, section numbering and italicized text in the outline. 
- Replace the red text with the Learning Team written input or graphic following the italicized text.
 
 
 
 
Use of System Analysis and Development for the
XYZ Corporation ATM System.
 
 
Team Member Names
 
Course
 
Date
 
Instructor
 
 

Use of System Analysis and Development for the
XYZ Corporation ATM System.
 
Section 2.  General System Concept
(Title only)
 
2.8       System Location and Networks
Using the information specified in weeks two and four and my Physical Network Diagram examples:
 
            - Describe where the new system will be used (physical location) and any network connections.
            Your text goes here
 
- Describe where interfacing systems (vendors or manufacturing facilities) are located and any network connections.
            Your text goes here
 
- Describe any network connections and locations required to support the testing locations stated in 4.2.
            Your text goes here
 
- Produce a Physical Network Diagram that shows the physical location and network components that will be used for this ATM system as described above.
  
GRAPHIC: Physical Network Diagram
Your diagram goes here
 
2.9       Cost/Benefit Analysis
                        - Based on your time line diagram and information given to you from XYZ Corp on required implementation dates and projected usage, provide an estimated Return on Investment for this system. Show the numbers on how you reached the Return on Investment solution.
 
Assume:
You can buy an ATM machine (including the video subsystem) for $3000 per unit delivered to your facility.
- XYZ bought a corporate license for the language software at an annual cost of $25000. 
The cost for both acceptance testing from the vendor and installation testing at the location selected by XYZ is $200 per ATM.  
The set up cost at a designated location is $100 per ATM.
The initial 50 ATMs will become operational on day 1 of the stated month.
After the initial 50 ATMs are installed, installation will be at a rate of 16-17 ATMs per month.
Example:  ATMs installed in January will be come operational the 1st of February.
           
 When (month and year) will XYZ Corporation show a profit on the ATM system?
 
Your answer (month and year) to the question goes here.
 
Your data goes here.   However, you may attach an Excel spreadsheet to show your data.  Put a comment here pointing XYZ to the spreadsheet.
 
Section 3. System Methodology
 
3.4           Configuration Management
 
3.4.1          Configuration Management
- Given that you are either building your own ATM model OR buying one from a vendor, describe your configuration management process.
 
Your text goes here
 
3.4.2    Release and Version Control
- Given that you are either building your own ATM model OR buying one from a vendor, describe your release and version control process.
 
Your text goes here
 
3.5       Risk Management
 
3.5.1    Risk Management Process
- State the process of how you will identify and mitigate risks         during project development to insure successful implementation of the system during development.
 
Your text goes here
 
3.5.2    Potential Risks
- Create a table to Identify five potential risks to this project and how you will mitigate them. 
 
Your table goes here
 
Section 4. Other Documentation
 (Title only) This section describes the documentation for the system development.  DO NOT provide detailed documentation. Provide only what is asked for in this section.
 
4.2       Test Plan and Test Methodology
           
            4.2.1    Master Test Plan - Provide a list of the three most important pieces of information that should be included in the Master Test Plan.
 
Your text goes here.
 
            4.2.2    Types of Testing - Describe the types of testing and where the testing will be done.  Update the physical network diagram to support the process.  
 
Your text goes here. These should appear on the physical network diagram in section 2.8.
 
 
CMGT 555 Week 6 Supporting Activites
 
CMGT 555 Week 6  Supporting Activity  Analyzing Emerging Trends
 
Describe an innovative service in cloud computing that you would like to see that would benefit your workplace or an organization that you are familiar with.
 

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
 

Liquid error: Could not find asset snippets/sh_sbve-theme-snippet.liquid