CIT 276 ENTIRE COURSE


Ask a Question

CIT 276 ENTIRE COURSE

Sale price $60.00 Regular price $120.00

CIT 276 ENTIRE COURSE
 
 
WEEK  1
 
 
 CIT 276 Week 1 Individual Assignment Implementing and Troubleshooting ACLs Toolwire® Lab
 
Resource: Toolwire®
Complete the Implementing and Troubleshooting ACLs lab in Toolwire®.
Write a summary paragraph of the skills performed in the lab and what you learned.
 
 
WEEK 2
 
 
CIT 276 Week 2 Individual Assignment Configuring NAT and PAT Toolwire® Lab
 
Resource: Toolwire®
Complete the Configuring NAT and PAT lab in Toolwire®.
Write a summary paragraph of the skills performed in the lab and what you learned.
 
 
 
CIT 276 Week 2  Learning Team Assignment Comprehensive Project: Basic VLSM Calculation and Addressing Design
 
Continue working on the Comprehensive Project due in Week Five.
Complete a VLSM Calculation and Addressing Design for the network.
Submit documentation of this address scheme as you would want to document your network at work.
Subnet and provide the IP addressing for the topology given using the provided network address: 192.168.1.0/24. VLSM is used to meet the addressing requirements using the 192.168.1.0/24 network. The network has the following addressing requirements:
The Core LAN1 will require 50 host IP addresses.
The R1 LAN1 will require 20 host IP addresses.
The R2 LAN1 will require 12 host IP addresses.
The link from Core to R1 will require an IP address for each end of the link.
The link from Core to R2 will require an IP address for each end of the link.
The link R1 to R2 will require an IP address for each end of the link.
 
 
 
WEEK 3
 
 
CIT 276 Week 3 Individual Assignment Implementing IPv6 Toolwire® Lab
 
 
Resource: Toolwire®
Complete the Implementing IPv6 lab in Toolwire®.
Write a summary paragraph of the skills performed in the lab and what you learned.
 
 
WEEK 4
 
 
 
CIT 276 Week 4 Individual Assignment Establishing a Frame Relay WAN Toolwire® Lab
 
Resource: Toolwire®
Complete the Establishing a Frame Relay WAN lab in Toolwire®.
Write a summary paragraph of the skills performed in the lab and what you learned
 
 
CIT 276 Week 4 Learning Team Comprehensive Project: EIGRP and OSPF
 
Resource: Toolwire® lab: Build Your Own Network in a 4 Router WAN Topology
Continue working on the Comprehensive Project due in Week Five.
Prepare the following in Week Four:
Write a 2- to 4-page description identifying the commands used to configure EIGRP and OSPF on R1, R2, and Core. Include the output of the show run, show ip route, and show ip ospf neighbor commands for R1, R2, and Core routers that verify your configurations.
Submit the description.
Using the Toolwire® Build Your Own Network lab,perform the following tasks:
Configure EIGRP on R1, R2, and Core
Configure OSPF on R1, R2, and Core
 
 
 
WEEK 5
CIT 276 Week 5 Individual Assignment Establishing a Frame Relay WAN Toolwire® Lab
 
Resource: Toolwire®
Complete the Troubleshooting Frame Relay WANs lab in Toolwire®.
Write a summary paragraph of the skills performed in the lab and what you learned.
 
 
CIT 276 Week 5 Individual Assignment Troubleshooting Practice
 
Use all the resources you have available to you in this course and those you learned in previous courses in this program to practice and reinforce your ability to troubleshoot.
Write a comprehensive list of at least 15 troubleshooting commands that you use most, include a short description of what each command is used for and how and when you would use it. Include 6 commands that do not start with the word show.
 
 
 
CIT 276 Week 5 Learning Team Assignment Comprehensive Project: WAN Connection
 
Resource: Toolwire® lab: Build Your Own Network in a 4 Router WAN Topology
Write a 1- to 2-page description identifying the commands used to configure NAT/PAT and PPP serial connection between Core and R4 routers. Configure R4 router to simulate an ISP connection. Include the output of the show run and show ip route, commands for Core and R4 routers that verifies your configurations.
Perform the following tasks using the Toolwire® Build Your Own Network lab:
Perform basic configuration on R4 router
Assign 209.165.200.224/30 network IP addresses to the interfaces connecting Core and R4 routers
On Core router, configure NAT with overload (PAT) to translate any 192.168.1.0/24 IP address to the IP address configured to the serial interface connecting to R4 router.
Configure a default route on Core router and propagate the route in OSPF.
Configure a static route on R4/ router to reach 192.168.1.0/24 networks.
 
CIT 276 Week 5  Learning Team Assignment Comprehensive Project Report
 
Compile your project sections from Weeks Two through Five into one final Comprehensive Project Report.
Create a cover page and a Reference page for the entire report.
Submit your final Comprehensive Project Report.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
 

Liquid error: Could not find asset snippets/sh_sbve-theme-snippet.liquid